Wholesale MOQ policy: 10 units for devices and 20 per accessory SKU

A clear guide to NexusSupply's two MOQ rules, mixed-SKU orders and the delivery methods available before onward freight.

Mixed wholesale cartons of phones and charging accessories

NexusSupply uses two starting points for wholesale orders. New Android phones and tablets, together with used iPhones, start at 10 units with no per-SKU minimum. Anker and other accessory products start at 20 units per SKU. Buyers may combine multiple SKUs in one order, and the total order value must exceed US$2,000.

Check What to count Pass condition
Device total New Android phones, tablets and used iPhones added together 10 units or more, with no per-SKU minimum
Each accessory SKU Units of that accessory SKU only 20 units or more for every accessory SKU
Order value The whole order Must exceed US$2,000

The 10-unit device total can be split across models. The order total must exceed US$2,000. Fill the quantities from the current quotation. This table does not set a unit price.

Review the low-MOQ phone wholesale route to turn these rules into a current device mix before sending the RFQ.

The mixed-SKU wholesale order planning guide shows how to apply the thresholds to a shelf-based device and accessory mix.

Key Takeaways

  • New Android phones, tablets and used iPhones start at 10 units with no per-SKU minimum.
  • Anker and other accessory products start at 20 units per SKU.
  • A single order can combine phones, tablets and accessories across multiple SKUs.
  • The total order value must exceed US$2,000.
  • Delivery is available to a buyer-nominated address in mainland China or Hong Kong, or through buyer-arranged UPS/DHL pickup from our warehouse.

Devices: 10 units with no per-SKU minimum

The 10-unit starting point applies to new Android phones and tablets and used iPhones. It applies to the device order as a whole, not to every model. A buyer can therefore mix entry, mid-range and flagship devices without committing to ten units of each.

A retailer might request several Android phone models with different storage options and colours, or add tablets for a particular channel. A used iPhone request should also state the grade, battery-health target and acceptable model range. Those conditions are checked against the current batch before quotation.

Checklist

  • List the device models, colours and storage options you want to compare.
  • State the total device quantity, rather than forcing a minimum onto each SKU.
  • Add used-iPhone grade and battery requirements where relevant.

Accessories: 20 units per SKU

Phone accessories, including Anker products, start at 20 units per SKU. This applies to chargers, power banks, cables, audio products, wearables and docking stations. The buyer can still combine those lines in one mixed order.

Accessories can be added to a phone or tablet order in the same RFQ. Where relevant, state the plug type, packaging language and target market so the quotation can confirm the available version and packing assumptions.

Checklist

  • Plan at least 20 units for each accessory SKU.
  • Combine accessories with devices when the retail mix calls for them.
  • Confirm plug type, label language and packaging needs before the quote is finalized.

Combining multiple SKUs in one order

A single order can combine Android phones, tablets, used iPhones and accessories. The device and accessory starting points still apply, and the total order value must exceed US$2,000.

Check the three counts separately. Passing the quantity checks does not mean the order-value check has passed.

Schematic of three separate counts: device total, each accessory SKU, and order value. Not a product photo.
Schematic of the three counts. Not a product photo.

A common mistake is to read the 10-unit device tier as 10 units of every model. It applies to the device total.

Put the model list, quantities, used-device condition requirements, accessory quantities and delivery method in the RFQ. The resulting quote is easier to check against availability, and it will not assume a model-level device minimum where none applies.

Delivery scope before onward freight

NexusSupply can deliver to the buyer’s nominated address in mainland China or Hong Kong. The buyer can instead arrange UPS or DHL pickup from our warehouse. The delivery handoff guide lists the details to provide. After that agreed handoff, the buyer arranges onward transport, insurance, import clearance, duties, taxes and final-market delivery.

NexusSupply does not provide FOB, DDP or onward export services. Confirm the nominated address or courier booking details in the RFQ. Packing, carton data and the handoff method should be settled before payment or collection.

Evidence and standards

USB-IF’s USB-C cable guidance documents the capability marking and compliance requirements behind cable variants. IATA’s battery transport guidance explains why battery configuration affects shipment handling. These standards do not set NexusSupply’s MOQ policy. They are reference points for product and freight constraints used alongside the published catalog data.

Request a quote

Send the device models, total quantities, accessory SKUs, destination country and delivery method through the mixed-order RFQ.

Does the 10-unit tier mean 10 units of every model?

No. New Android phones, tablets and used iPhones start at 10 units with no per-SKU minimum. The 10 units are the device total.

How are tablets and used iPhones counted with new phones?

They count toward the same device total. Accessory lines in that order are still counted per SKU.

Can an accessory line be below 20 units?

No. Accessory products, including Anker, start at 20 units per SKU. Device quantity does not fill an accessory line.

Does an order of exactly US$2,000 qualify?

No. The total order value must exceed US$2,000.

How should an accessory-only request be written?

List each accessory SKU and its quantity. Each accessory SKU still starts at 20 units, and the total order value must exceed US$2,000.

What to send us

We reply within 1 business day.

Item Why we need it Example format
Device models, grades and total quantities Needed to price the line and check the published terms [buyer fills]
Accessory SKUs and quantities of at least 20 units per SKU Needed to price the line and check the published terms [buyer fills]
Colour, storage, plug type and packaging requirements Needed to price the line and check the published terms [buyer fills]
Buyer-nominated mainland China or Hong Kong address, or buyer-arranged UPS/DHL pickup Needed to price the line and check the published terms [buyer fills]
Target total order value above US$2,000 Needed to price the line and check the published terms [buyer fills]

We reply within 1 business day.

Low-MOQ and mixed-SKU order design

Continue through this buying topic

Related buying guides and inspection checklists for wholesale phone orders.

Commercial next step

Plan a low-MOQ phone order

Use the guide to define the requirement, then continue on the matching catalog or order route.